Tutorials

Step-by-step walkthroughs for setting up EMWaver on specific platforms, connecting hardware modules, and running your first scripts - all without digging through toolchains or IDE setup.

Windows

Flash ESP32 firmware on Windows

Walk through installing the Windows app, putting an ESP32-family dev board into bootloader mode, and flashing the managed EMWaver firmware — no manual toolchain required.

Read tutorial →

Windows

Set up a CC1101 on Windows (433 MHz)

Wire a CC1101 radio module to your ESP32-family board, open the built-in cc1101.js script, and transmit a basic 433 MHz ASK/OOK wave — all from the Windows app.

Read tutorial →

More coming

Additional tutorials for macOS firmware flashing, iOS/Android mobile setup, RFID module walkthroughs, and I2C/SPI peripheral scripts are on the way. Check back or join the community for early previews.